JDSU NT850 User's Guide download pdf (Page 59)

Chapter 4 Performing Cabling Tests

Performing Cable Tests

LanScaperPRO Network Tester User’s Guide 43

Upon completion of the test, the cable pairs status,

wiremap, test result, and Remote ID is displayed on

the Cable Test Results screen, as Figure 18.

Figure 18 The Cable Test Results screen after a

complete cable test

A guide to interpreting the test results by area, left to

right and top to bottom:

– Cable Pairs Status Area: Displays the status for

each pair in the cable. Possible values include:

Split, Short, Open, Revrs (Reverse), and

High R (High Resistance).

– Wiremap Area: The top row of numbers in the

wiremap area represents the connector pins on

the main unit, while the second row represents

those on the remote. Lines that connect the top

row to the second row show the connections

detected. If there is a miswire, the lines cross,

indicating the connections are not straight

through. If no connection is detected for some of

the pins, there are no lines between the rows. If a

short is detected, the lines connect between the

shorted pin numbers on the top row. If multiple

LanScaperPRO_User_Guide.book Page 43 Friday, January 25, 2008 1:14 PM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 105 106

No comments

JDSU NT850 User's Guide Page 59