User's Guidewww.jdsu.com/knowNet-Ritef Continuity and Wiremap TesterTrace-Ritef Tone Generator and Amplified Tone Tracer
6Reverse—A reverse (Rev) pair is a special case of a Miswire, and both icons will be flashing. The wires are connected to the correct pair of pins, bu
7GREY=FLASHINGPassing Shielded Cable4-5 Pair Open1-2 Short3-4 & 4-5 Split Pair2 & 3 Miswired
8Battery InstallationNet-Rite™Using a #1 Phillips screwdriver, unscrew and remove the battery door. Remove old cell batteries. Rapping the case agains
9Trace-Rite™Remove the screw at the back of the Tone Generator or Amplified Probe with a #1 Philips screwdriver and remove battery door. Remove old c
10To Replace the Probe TipUsing a #1 Phillips screwdriver, remove the screw on the back of the Trace-Rite™ nearest to the probe.Pull the tip out of th
11Models, options & accessoriesDescriptionOrdering numberNet-Rite continuity and wiremap tester and Trace-Rite tone generator with onboard probe k
12Net-Rite™ SpecicationsPhysical DimensionsSize: 11.3 x 5 x 2.7 cm (4.5 x 2 x 1.1 inches) Weight: 100 grams (3.5 oz.), with battery and remoteEnvi
13Trace-Rite™ SpecicationsPhysical DimensionsSize: 20.6 x 4.45 x 3.0 cm (8.1 x 1.75 x 1.2 inches)Weight: 113 grams (4 ounces)EnvironmentalOp
14Customer Services This section provides a description of customer services available through JDSU (including returns policies and procedures) and wa
15manufactured equipment. This ensures products meet all published specifications, including any applicable product updates. Calibration — JDSU’s cali
16A detailed description of the problem or service requested. The name and telephone number of the person to contact regarding questions about the rep
17Warranty Information JDSU guarantees that its products will be free of all defects in material and workmanship. This warranty extends for the period
18is reused, recycled, or disposed of in an environmentally friendly manner, and in compliance with all applicable national and international waste le
Document InformationDoc. # TU9891Revision 500, 04-08Englishwww.jdsu.com/know
Voltage ProbeIndicatorLEDVolume Up/DownTracer/Power ButtonPower/ToneType SwitchRJ11
RJ11LCD ScreenRJ11Remote
1Warning!Do not attach to AC power, this may damage the Net-Rite™ and the Trace-Rite™ generator and could cause a safety hazard for the user.Caution!I
2FeaturesNet-Rite™ FeaturesAuto-on when sensing the remote or a shortAuto-off when the remote is disconnected to conserve battery lifeErgonomic shape,
3Instructions for UseTo Wiremap a CableUsing the RJ45 jacks, connect Net-Rite™ main unit and remote to the cable you want to test.An icon and the wire
4Adjust volume control on the side of the Trace-Rite™ to a comfortable level. If the signal is very loud when near the cable, adjust the volume to av
5Interpreting Wiremap ErrorsMiswire—One or more pins or pairs are not connected to the correct pins at the other end of the cable, i.e., one-to-one—pi
Comments to this Manuals